Description
PUSH & GO
Sling swivel + barrel mount
6,0 mm
22330.0832 / 0871
72,42 €
Tax excluded,
plus shipping cost
- Suitable for:
Shotguns with sling width 23 mm - Colour options:
black
To make the shotgun easier to carry, the rifle sling is attached to the barrel. Previously, this required a laborious process where the sling swivel was soldered to the barrel. The unique barrel mount makes installation extremely simple. All that needs to be done is to place it at the correct position then glue and fix in place using a socket screw.
NOTE:
The colour option “shiny black” is no longer available.
Article 22330.0832 only available from week 07/24.
DETAILED INFORMATION BARREL MOUNT FIXED POSITION
| Diameter [mm] | Dimensions [mm] | Temperature [°C] | Weight [g] | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| d1 | l1 | d2 | d3 | l2 | l3 | l4 | l5 | l6 | min. | max. |  |
| 6,1 | 16 | Ø18: 17,6-18,5 | 21,2 | 10 | 7,8 | 13,5 | 9 | 23,5 | -50 | 150 | 15 |
| 6,1 | 16 | Ø20: 20,0-20,4 | 23,2 | 10 | 7,8 | 14,4 | 9 | 25,5 | -50 | 150 | 11 |
DETAILED INFORMATION SLING SWIVEL
| Diameter [mm] | Dimensions [mm] | Load capacity [kN] | Temperature [°C] | Weight [g] | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| d1 | l1 | l2 | l4 | l4 | l5 | d1 | d2 | d3 | max. | min. | max. | |
| 9,6 | 9,6 | 9,4 | 9,6 | 10,3 | 22,5 | 9,6 | - | 9,6 | 1,2 | -50 | 150 | 16 |
Easily mounted by an experienced gunsmith in only 30 minutes!
- Mounting on the barrel:
- 1. Apply adhesive to the inside of the barrel mount.
- 2. Position barrel mount on the barrel.
- 3. Fasten barrel mount with hexagon socket screw WS 2.
Material sling swivel
Pin part:
Stainless steel 1.4542, black
Spring:
Stainless steel
Material barrel mount
Barrel mount:
Stainless steel 1.4404, black
Screw:
Stainless steel A2
Download data sheet
Sling swivel & Barrel mount
Technical data and mounting instruction:
FAQ
Whether shooting range, raised hide, cleaning or transport, the rifle sling must be removed frequently. The PUSH & GO sling swivels offer the fastest and safest solution for this. The tensile forces are up to 170 kg for the 6.0 mm version.
Yes, 9.5 mm and 6.0 mm systems can be combined on one gun. This means that theoretically you could use a different type of socket on the front stock than on the rear stock.
Basically yes. Therefore we offer numerous variants to cover the complete spectrum. For example, our 6.0 mm versions are ideal for slim rifles. In addition, we offer a flexible mount solution especially for shotguns.
In principle yes, you will find the necessary technical data such as hole diameters on the back of the packaging. However, we still recommend installation by a gunsmith with the appropriate tools.
Yes, the complete development and production takes place at our company in Achstetten-Bronnen near Ulm in Germany.
No, all parts (including the spring inside) of our PUSH & GO sling swivels are made of stainless steel. An almost 100-hour salt spray test, which was passed without damage, proves this more than clearly. By means of a special process, the sling swivels of our PUSH & GO range are manufactured in such a way that no disturbing noises can occur. An endurance test with over 100,000 repeat cycles confirms this in an impressive way.
Reviews
There are no reviews yet.